Holley's complete accessory systems for LT4 and LT5 applications have all accessories pulled up and in tight. Plus, they add the much needed hydraulic power steering solution. There are no shortcuts here. Holley incorporates a splined dual bearing system that eliminates all belt stresses on the P/S pump's internal bearings, assuring long life. The supercharger drive maintains the original and optimized belt path and tensioner. The accessory layout is as if the original manufacturer had designed it for your swap application. Included with each drive system is a throttle body angle correcting adapter that better positions the TB for swap applications as opposed to the aggressive original application intended angles. Versions of these accessory drives are available for both wet and dry sump applications. Patent - www.holley.com/patents/

Adds power steering without any belt load on the P/S pump

Notably more clearance to swap applications than other options

Original equipment look-Black finish

LT4 style premium alternator

LT4 style water pump design

Compact SD7 A/C compressor

A/C line adapters included

Type II power steering pump

P/S hard line adapters included

Bottom outlet swivel heater hose options for swap application clearance

Throttle body angle correcting adapter for easier intake tube routing on swap applications

OE pulley ratios for optimal accessory performance, allows for larger SC crank pulley

Available LT4/5 dry-sump & LT4 wet-sump applications

LT4/5 specific accessories available for plumbing oil cooler and PCV oil separator OE system